Unitree G1 — Used Price, Specs & All Configurations
Compare all Unitree G1 configurations — Basic, EDU U1 and EDU U2 — side by side: degrees of freedom, compute, hands, add-ons and used vs new price.
Available Unitree G1 configurations
In StockPre-OwnedUnitree G1 U2
A compact humanoid EDU configuration with a 3-DoF waist, 7-DoF arms and a 100 TOPS Orin NX module — inspected per unit, quoted with the report and real photos.
- Height132 cm
- Weight~35 kg
- Running speed2 m/s
New $53,900
In StockPre-OwnedUnitree G1 U1
A compact humanoid EDU configuration with unitree_sdk2, ROS 2 and Python access on a Jetson Orin compute module — inspected per unit, quoted with the report and real photos.
- Height132 cm
- Weight~35 kg
- Running speed2 m/s
New $43,900
In StockPre-OwnedUnitree G1 Basic
A compact ready-to-run humanoid with 23 degrees of freedom — inspected per unit, quoted with the report and real photos.
- Height132 cm
- Weight~35 kg
- Running speed2 m/s
New $21,600
Compare configurations
| BasicAvailable now | EDU U1Available now | EDU U2Available now | |
|---|---|---|---|
| Degrees of freedom | 23 (1-DoF waist · 5-DoF arms) | 23 (1-DoF waist · 5-DoF arms) | 29 (3-DoF waist · 7-DoF arms) |
| Compute | Standard onboard compute | Jetson Orin · 40 TOPS | Orin NX 16 GB · 100 TOPS |
| Hands | Fixed dummy hands (no wrists) | Fixed dummy hands (no wrists) | Dummy hands with wrists |
| Secondary development | — (app & hand controller only) | unitree_sdk2 / ROS 2 / Python | unitree_sdk2 / ROS 2 / Python |
| Battery life | ~2 h per charge | ~2 h per charge | ~2 h per charge |
| Optional add-ons | MID360 LiDAR · D435i depth camera · spare battery (3 options) | Adds AGX Orin dock (275 TOPS) and Dex3-1 dexterous hands (8 options) | Adds Dex3-1 dexterous hands (7 options) |
| New-unit price (reference) | $21,600 | $43,900 | $53,900 |
| Our used price | $12,670 | $23,340 | $30,010 |
| You save vs new | $8,930 · 41% | $20,560 · 47% | $23,890 · 44% |
| Best for | Ready-to-run demos, teaching and content creation — walk and interact straight from the app and hand controller. | A first developer unit: SDK and ROS 2 on 40 TOPS, with an upgrade path to the AGX Orin dock and Dex3-1 hands. | Whole-body control and grasping research — 29 DoF with a 3-DoF waist and 7-DoF arms on a 100 TOPS Orin NX. |
| View details | View details | View details |
New-unit reference is the highest verified third-party price per configuration. Used prices are USD for the inspected unit in stock.
Where the Unitree G1 fits
The G1 is Unitree's compact humanoid line: a 132 cm, ~35 kg robot built on one shared folding body, where the configuration — not the chassis — decides what it can do. Understanding where the line sits, and where each configuration sits within it, is the fastest way to narrow down a used purchase.
In Unitree's lineup
The G1 is the most affordable humanoid family Unitree sells, sitting below the taller H-series in price and in payload. It is the line that turned a bipedal robot into a realistic purchase for a lab, a school or a creator, rather than something only a corporate R&D budget could reach.
On the used market
Second-hand G1 units trade well below the new-unit market reference, and the spread between configurations is mostly about compute and hands. A Basic and an EDU U2 are the same robot on the outside; the U2's 100 TOPS, wrist joints and extra waist DoF are what whole-body research actually loads onto.
Who it suits
Demos, teaching and content creation are comfortably covered by a used Basic, which runs straight from the app and hand controller. A first developer unit is the EDU U1 — SDK and ROS 2 on board, with an upgrade path through the AGX Orin dock and Dex3-1 hands. Grasping and whole-body control research wants the EDU U2 from the start.
Buying a used Unitree G1
The Unitree G1 is the most affordable humanoid robot family you can actually buy today, and the used market is where it makes the most sense. Every configuration shares the same 132 cm, ~35 kg folding body with about two hours of runtime — what separates the Basic from the EDU tiers is compute, software access and arm hardware.
The Basic is a complete ready-to-run machine: full walking mobility from the mobile app and hand controller with no software work on your side. EDU U1 is the developer entry — unitree_sdk2, ROS 2 and Python on a Jetson Orin (40 TOPS). EDU U2 is the whole-body research build: a 3-DoF waist, 7-DoF arms and a 100 TOPS Orin NX on the same compact body.
Used G1 pricing typically lands well below the new-unit market reference, and every unit we list is inspected per unit, quoted with the inspection report and the real photos of the exact robot in stock. The table above compares all three configurations so you can match body, compute and hands to the work you actually do.
Considering other humanoids? Browse all used humanoid robots.